Audit of following Work Instructions was done in TM Shop. Report is as follows:-
Assembly of short circuit cage( W 21.404):-
- Record of the stack length measurement should be be taken as prescribed in para 3.9 and para 3.11 and para 3.15 of this WI.
- Pressing machine gauge for measuring 45T pressure is due for calibration.
- Auxilary pressing ring as mentioned in para 3.14 of this WI should be available in the shop.
- Tightening of nuts as mentioned in para 3.15 of this WI should be be done with torque wrenches.
- Source of half rings could not be traced .
TEW make traction link bolt’s lab test report has come today. Sample has failed the chemical test and passed the hardness test.